Anapafseos 5 . Agios Nikolaos
Crete.Greece.72100
2841026182
Risk type: Cuts The circular saw blade may be mounted on an angle grinder and could therefore, against its intended use, be used as a hand-held circular saw. As a consequence, this could cause kickback or loss of control over the tool, resulting in serious injury. The product does not comply with the requirements of the Machinery Directive and the relevant European standards EN 60745 and EN 62841. Measures taken by economic operators: This product listing was removed from Amazon's marketplace, Warning consumers of the risks (By: Distributor) |
Category: Motor vehicles Product: Passenger van / Light commercial vehicle Brand: Hyundai Name: H1 Travel / H1 Cargo Type / number of model: Type-approval numbers: e4*2001/116*0129 / e4*2007/46/0091; Type: TQ Batch number / Barcode: The affected vehicles were manufactured between 6 March 2018 and 20 April 2018. Risk type: Injuries The locking mechanism on the sliding door may be defective. This may cause unintentional closing of the sliding door which could cause injury. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Injuries The rear door lock Bowden cable may be incorrectly fixed, resulting in damage to the cable. This may cause the rear doors to open when the rear windows are lowered, leading to injuries and potential accident. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Category: Motor vehicles Product: Passenger van / Light commercial vehicle Brand: Ford Name: Transit, Transit Custom Type / number of model: Type-approval number: e1*2007/46*1100*07 and e1*2007/46*1005*09 Batch number / Barcode: Specific vehicles built between 06/02/2017 and 29/08/2017 Risk type: Injuries The shoulder height adjuster bolt on the driver-side's front seatbelt may be incorrectly torqued. As a result, in the event of an accident, the seatbelt anchorage bolt may separate from the seatbelt shoulder height adjuster, leading to injuries. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Injuries The welds on the front track bar bracket may not be located correctly on the seam. This may cause separation of the front track bar bracket from the frame, reducing steering control and leading to an accident without prior warning. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Category: Motor vehicles Product: Passenger car Brand: KIA Name: Stinger Type / number of model: EC Type-approval numbers: e11*2007/46*4002*00, e11*2007/46*4002*01 Stinger (CK) (2018) Batch number / Barcode: The affected vehicles were manufactured between 01.07.2017 and 04.04.2018 Risk type: Fire There is a rough edge in the left fender body panel. It could damage the insulation of the front wiring harness located in the engine and passenger compartments. This could cause it to short circuit, increasing the risk of a fire. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Injuries There is a possible defect in the steering column height adjustment mechanism. It may disengage in motion, possibly leading to a loss of steering control. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Injuries There is a possible defect in the steering column height adjustment mechanism. It may disengage in motion, possibly leading to a loss of steering control. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Category: Motor vehicles Product: Passenger car Brand: BMW Name: 1, X1 Type / number of model: Type-approval numbers: e1*2007/46*0371*19 bis *24, e1*2007/46*1676; Types: UKL-L, F1X Batch number / Barcode: The affected vehicles were manufactured between 5 October 2018 and 21 January 2019. Risk type: Injuries The nuts of the rear light brackets may be contaminated with oil. Oil can cause cracks in the light brackets and the rear lights may separate from the vehicle leading to an accident. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Injuries The rear spoiler may not have been produced according to specifications. The upper part of the rear spoiler may consequently become detached and drop onto the road, posing a risk to following traffic. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Chemical, Environment The plastic of the wristband contains 2-ethylhexyl phthalate (DEHP) (measured value: 28 % by weight) and short chain chlorinated paraffins (SCCPs) (measured value: up to 0.44 % by weight). DEHP is a phtalate that may harm the health of children, causing possible damage to their reproductive system. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bioaccumulate in wildlife and humans, posing a risk to human health and the environment. Also prolonged exposure to them through the skin may cause cancer. The product does not comply with the REACH Regulation and the Regulation on persistent organic pollutants (POP Regulation). Measures taken by economic operators: Withdrawal of the product from the market (By: Importer) |
Risk type: Choking, Injuries The plastic label on the carrier can be easily detached. A small child may put it in the mouth and choke. The durability of the carrier is not adequate. Consequently, it could break while in use, causing the child to fall. The product does not comply with the relevant European Standard EN 13209-2. Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) |
Risk type: Chemical The plastic of the cover contains cadmium (measured value: 0.03 % by weight). Cadmium is harmful to human health, because it accumulates in the body, can damage organs and may cause cancer. The product does not comply with the REACH Regulation. Measures taken by economic operators: Withdrawal of the product from the market (By: Importer) |
Risk type: Choking, Suffocation The zip tag on the bear can be easily detached and the fibrous stuffing material of the toy is easily accessible through the zip. A small child may put the zip tag or the stuffing material in the mouth and choke. In addition, the plastic bag of the packaging is too thin. If a child plays with the packaging, the plastic could cover the mouth and nose, blocking the airways. The product does not comply with the requirements of the Toy Safety Directive and the relevant European standard EN 71-1. Measures ordered by public authorities (to: Other): Temporary ban on the supply, offer to supply and display of the product |
Risk type: Chemical The plastic of the doll contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 31% by weight). This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation. Measures taken by economic operators: Withdrawal of the product from the market (By: Importer) |
Risk type: Choking The wooden keys are too long. A small child could put them in the mouth and choke on them. The product does not comply with the requirements of the Toy Safety Directive and the relevant Standard EN 71-1 Measures taken by economic operators: Recall of the product from end users (By: Manufacturer) Company recall page: http://www.nofred.com/pages/harbour-keys-recall |
Risk type: Chemical The product contains bis (2-ethylhexyl) phthalate (DEHP) (measured value: 27.06 % by weight). This phthalate may harm the health of children, causing possible damage to the reproductive system. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains bis (2-ethylhexyl) phthalate (DEHP) (measured value: 25% by weight) and di-'isononyl' phthalate (DINP) (measured value: 0.17% by weight). These phthalates may harm the health of children, causing possible damage to the reproductive system. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains bis (2-ethylhexyl) phthalate (DEHP) (measured value: 7.76% by weight) and di-'isononyl' phthalate (DINP) (measured value: 20.5% by weight). These phthalates may harm the health of children, causing possible damage to the reproductive system or the liver. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains bis (2-ethylhexyl) phthalate (DEHP) (measured value: 13.24 % by weight) and di-butyl phthalate (DBP) (measured value: 3.6 % by weight). These phthalates may harm the health of children, causing possible damage to the reproductive system. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 22% by weight) This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains bis (2-ethylhexyl) phthalate (DEHP) (measured value: 5.78 % by weight). This phthalate may harm the health of children, causing possible damage to the reproductive system. Moreover, it may damage fertility and be a risk to the unborn child. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains bis (2-ethylhexyl) phthalate (DEHP) (measured value: 0.19%by weight), di-butyl phthalate (DBP) (measured value: 0.19% by weight) and di-'isononyl' phthalate (DINP) (measure valued: 13.29% by weight). These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Importer): Withdrawal of the product from the market |
Risk type: Chemical The product contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 17% by weight). This phthalate may harm the health of children, causing possible damage to the reproductive system. The product does not comply with the REACH Regulation. Measures ordered by public authorities (to: Retailer): Withdrawal of the product from the market |
Risk type: Chemical The product contains Chromium (VI) (measured value: 16.1 mg/kg) Chromium (VI) is classified as sensitising and may trigger allergic reactions on contact with the skin. The product does not comply with the REACH regulation. Measures taken by economic operators: Recall of the product from end users (By: Distributor) |
Risk type: Chemical The plastic of the flag contains cadmium (measured value: 0.09 % by weight). Cadmium is harmful to human health because it accumulates in the body and can damage organs and it may cause cancer. The product does not comply with the REACH Regulation. Measures taken by economic operators: Withdrawal of the product from the market (By: Importer) |
Risk type: Electric shock The thermal cut-out device on the product does not work correctly. The hairdryer can overheat, causing the plastic material to melt and leaving live parts accessible. The user could touch these parts and receive an electric shock. The product does not comply with the Low Voltage Directive and the relevant European standard EN 60335. Measures taken by economic operators: Recall of the product from end users (By: Importer) |
Risk type: Burns, Electric shock, Fire The hairdryer does not have a thermal cut-out device and the plastic material of the casing is combustible. As a consequence, the hairdryer could overheat and catch fire. Melted plastic could also cause burns and leave live parts accessible, leading to an electric shock if touched by users. The product does not comply with the requirements of the Low Voltage Directive and the relevant European standard EN 60335. Measures ordered by public authorities (to: Distributor): Ban on the marketing of the product and any accompanying measures, Recall of the product from end users, Withdrawal of the product from the market |
Risk type: Injuries The crane is mechanically too weak and the stability of the crane is not sufficient. Mechanical failure or impaired crane stability may lead to the crane falling with the load and causing injuries. The product does not comply with the requirements of the Machinery Directive. Measures ordered by public authorities (to: Importer): Ban on the marketing of the product and any accompanying measures |
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου